Flexalen 600 met één leiding

This brochure is giving an introduction to Polybutene including a review of the performance of Polybutene pressure piping systems in meeting the needs of sustainable building regulations.

Complete catalogus van het Flexalen assortiment. Inclusief technische data, afmetingen, gereedschap en acccessories.

Safety data sheet: Flexalen corrugated tubes (outer casing).

Heat loss tests are performed on different samples of the Thermaflex Flexalen 600 series and one ST-PUR-PE sample with the Thermaflex heat loss equipment and at two recognized test facilities, both using different test methods. The results of the institute using the same, guarded end method comply with the Thermaflex heat loss equipment’s results. The results of the institute using the calculated end method differ considerably from the Thermaflex results. In this paper a comparison of these methods and results and a verification of the Thermaflex heat loss equipment is given.

Acoustic properties Polybutene.

Creep resistance Polybutene.

Dimensions plumbing pipes

Expansion compensation.

Fire behaviour of Polybutene.

Flexural Elastic Modulus of Polybutene.

Insulation value - heat conductivity of Polybutene.

Heat conductivity comparision Polybutene to other plastics.

Oxygen permeation resistance

Water hammer resistance.

The Cradle to Cradle Certified Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories - material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category - Basic, Bronze, silver, Gold or Platinum - With the lowest achievement level representing the products overall mark

Approval contact with wholesome water for domestic purposes having met the requirements of BS 6920-1:2000 'suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water'.

Certificate number: 21665/B0 BV. 

Type of product: Thermoplastic material pipes and fittings, Flexalen 600. 

(July 2014).

KIWA International Conformity EN15632 part1 and 3 - Flexalen 600.

(May 2011).

KIWA - KOMO technical approval-with-product certificate for Flexalen 600. 

(January 2007).

Reference number: 0910276AU.

Ecospecifier Product Assessment Certificate for Flexalen 600.

(November 2010).

"Kleinbrenner"-test (Buyilding material Class B2) according to DIN 4102 B2  for Flexalen 600

Lambda test certificate according to EN 15632-1 - Flexalen 600

Lambda test certificate according to EN 15632-1 - Flexalen 600, 0.036

Public health certificate for polybutene pipes (IT)

VOC Microchamber test certificate - Flexalen 600, ThermaSmart PRO. According to ISO 16000.

This process certificate is issued by KIWA on the basis of BRL 5609 'pre-insulated flexible plastics piping systems for warm water distribution outside buildings'

Together with KIWA the welding process of electrofusion, polyfusion and butt welding is technical approved with product certificate stated requirements.

Technical report of dynamic tests performed on Flexalen pre-insulated pipe systems, simulating seismic with 7-9 intensity on the MSK-64 scale.
Flexalen is recommended for applications in the regions with seismic activity of 7-9 magnitude.

Drinking water Health Certificate for Flexalen and PB pipes (RO)

KTW organoleptic test certificate for drinking water purposes - Flexalen, PB pipes - Size group 1

KWR Biofilm cultivation test certificate - PB pipes

CE Declaration of Conformity - ThermaSmart PRO, Flexalen 600

Temperature cycling test certificate according to EN 12293 - Flexalen

DVGW type examination certificate. 

Product Category: plastic pipes for drinking water installations (group 2).

Registration number: DW-8326CP0310 (September 2014).