By clicking "OK" or proceeding on this website, you confirm having read and accepted our cookie policy. More details...

Quimper Cathedral

Quimper, France
Delicate heritage to protect
Quimper Cathedral
Quimper Cathedral
Quimper Cathedral
Quimper Cathedral
Quimper Cathedral
Quimper Cathedral

Historic monuments are passed down through centuries from one generation to the next. It’s our job to preserve them in the best possible state. At the same time, we also want to equip them with modern and high quality comforts to preserve their utility. In 2014, the heating system of Quimper's majestic cathedral was heavily deteriorated. The Finistère regional service for architecture and heritage took up the challenge of renovating the Cathedral's heat supply to secure the comfort and warmth of the congregation and visitors. The only problem: it lay beneath 170 m² of flagstones weighing 1.2 tons each.

Today, it is unusual for heating systems in cathedrals or historic monuments to be installed below the ground. But in Quimper Cathedral, a system of under-floor steel pipes had been installed in 1968. But in 2014, the network had clearly reached the end of its lifecycle as it was significantly corroded, giving rise to serious leaks and energy losses, aggravated by the weight of the heavy flagstones. A quick and effective renovation was vital.

A hand-picked team

Faced with this great challenge, Mr. Pierre Alexandre, curator of Quimper Cathedral, and a French architect split the project into two sections: heating and paving. A.R.T (Armoricaine de Restauration et de Travaux) was selected by public tender to carry out the paving work, including the excavation of the floor of the cathedral and the removal of the gigantic dressed stones. For the heating section, it was important to mobilize bright experts for the design of the delicate project, and ensure the best possible solution. 

The design consultants Bâtiments et Techniques, appointed by the heritage service, recommended a solution based on Flexalen technology. Its ease and speed of installation, minimal use of space - allowed by its flexibility - and durable efficiency proved an ideal match for that challenge. For the installation, Prothermic, a local heating engineer that is well known for its experience in pre-insulated pipeworks, assembled a hand-picked team for the challenging project.


Conservating patrimonial heritage, flexibly

Bâtiments et Techniques had already worked with Flexalen in former projects, and were thus already convinced of its advanced flexibility. Indeed, to avoid digging deeper than the original trenches and in order to manage the work in confined spaces, this was an essential asset. Furthermore Prothermic, who carried out the installation works of the heating system, successfully preserved the deeper archaeological remains thanks to the shallower trench required for Flexalen pipes.yProthermic also succeeded in collaborating with the paving business A.R.T.; due to Flexalen's flexibility and ease of welding, less workspace was needed compared to other technical solutions. Prothermic and A.R.T. could therefore establish manholes together where necessary, minimizing the spreading of dust - key to the protection of the cathedral's interior.

New life in an old building

Digging up the floor of a historic monument is a complicated task. The permissions and precautions necessary are more time-consuming and expensive than in ordinary buildings. The dust produced by the excavation for example, could easily spoil the costly and meticulous renovation. For these reasons, a headache-free distribution system was imperative. The longer the lifetime and performance of the system, the better for the conservation of the building, ensuring minimal financial and environmental cost in the future.

Great durability and resistance to corrosion phenomena are the two essential technical criteria which led us to recommend that Flexalen should be used.

Roland Petton, Fluid Engineer at Design Consultants Bâtiment et Techniques


Rapid, a watchword for the project

The entire pipe network needed to be sustainably replaced at the least possible disruption, especially considering that historic monuments are grounded by archaeological sub-soils which are crucial for its conservation. 

Have you ever felt disappointed on finding a church or a museum which you had planned to visit closed for renovation? This is exactly the kind of disappointment the Finistère regional service for architecture and heritage in Quimper wanted to avoid. So the timeframe for the renewal of the heating system was clear ... but narrow: the entire operation needed to take place between September 1st, at the end of the peak holiday season, and December 13th, the famous feast of Saint Corentin, patron saint of Quimper Cathedral. 


The realization and implementation of the heating network went exceptional smooth thanks to the optimized network design by Thermaflex and the fast installation by Prothermic. The cathedral is now equipped with a modern and efficient heating system under 170m² of 1.2 ton flagstones. The extraordinary cooperation with A.R.T, Prothermic and Bâtiments et Techniques kept the project well in the 3,5 month window, while the objectives of the Finistère regional service for architecture and heritage are fully covered. The Quimper Cathedral can now warmly welcome the congregation and visitors for generations to come.


Direction Régionale des Affaires Culturelles de Bretagne (Project Manager)

Service territorial de l'architecture et du patrimoine du Finistère (Project manager for repair works)

Bâtiment et Techniques (Project manager heating section)

Prothermic (Heating engineers)

A.R.T. (Armoricaine de Restauration et de Travaux) (Masonry and stonework)

  • 2600 m2
  • floor area in the cathedral
  • 21 meters
  • height under the arch of the nave
  • 31000 m3
  • to heat
  • 170 m2
  • of flagstones laid
  • 1.2 tons
  • per flagstone
September 1st - December 11th 2014
Hubert Lhotellier
Project design and realization
Sub.: Thermaflex France
Place Saint-Corentin , 29000 Quimper, France
8f0b713a 7071 4394 b335 856b93330341

Get in touch

Thermaflex International
+31 416 567 777
View all our offices


Brochures Catalogues

  Successful in the past - prepared for the future (PBPSA) PDF 1619 KB Preview Download Mail

This brochure is giving an introduction to Polybutene including a review of the performance of Polybutene pressure piping systems in meeting the needs of sustainable building regulations.

Contact request

Share this download

Results attachment
Thanks for sharing our download.
Thank you for contacting our office.