Seawater for temperature control in Cavalaire-sur-Mer

The biggest challenge was to find material that was resistant to seawater –and the PB in Flexalen is perfectly suited for this! Additionally, the polyolefin insulation foam does not absorb water, so there was no risk even if the insulation came in contact with seawater. Once started, the seawater pump would create a vacuum inside the pipe – Flexalen gave the best possible resistance to deformation. Installation time was also significantly reduced due to the flexibility of the material, its availability on coil, and easy weldability.

Beside the establishment of new buildings and the restoration of the town hall, a ‘high environmental quality’ approach could be realized: improve the comfort of users at affordable cost, by efficiently maximizing the use of renewable energy. To achieve this, the alternative chosen by the city was a geothermal heat pump using seawater.

The pipes were installed in a channel from the sea to the connection point at the post office. The pipes had to run underneath two roads and a pedestrian area. For the flow pipe, the choice was made for 125 mm because of the pressure loss due to the length of the pipe and the difference of height in the trajectory. Several coils were supplied for this project, and electrofusion welding applied for the connection between these coils. On various points along the trace of the pipe, fixation points were made for the installation and welding, as well as securing the pipes from moving.